Descargar Imprimir esta página

Motorola Solutions IMPRES 2 Guia Del Usuario página 69

Cargador para varias unidades
Ocultar thumbs Ver también para IMPRES 2:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 155
Table 26: Troubleshooting: Long-Term Storage Charge
Problem
Flashing red LED and display (if available) shows:
WRONG BATT TYPE
CANNOT LT STORE
or
CANNOT DISCHARGE
CANNOT LT STORE
Flashing red LED and display (if available) shows:
STORE INCOMPLETE
Low Capacity:yy%
Flashing red LED and display (if available) shows:
RADIO POCKET
CANNOT LT STORE
or
CHARGING POCKET
CANNOT LT STORE
Table 27: Troubleshooting: Ship Lithium Charge
Problem
Flashing red LED and display (if available) shows:
WRONG BATT TYPE
CANNOT SHIP LI
or
CANNOT DISCHARGE
CANNOT LT STORE
Chapter 16: Charger Troubleshooting
What to do...
Remove the battery from the pocket.
Verify that the battery is an IMPRES 2 or IM-
PRES battery. Other batteries will be faulted.
Clean the IMPRES 2 or IMPRES battery elec-
trical contacts using a dry cloth.
Remove power from the charger, then clean
the pocket electrical contacts using a dry cloth.
Try replacing the battery with another IMPRES
2 or IMPRES battery. If the fault no longer
exists, then take the faulted IMPRES 2 or IM-
PRES battery out of service.
If the fault persists with the replacement IM-
PRES 2 or IMPRES battery, take the charger
out of service.
The Potential Capacity of the IMPRES 2 or IM-
PRES battery may be less than the Long-Term
Storage selection. The battery may be nearing End
of Life.
The charger pocket is not the standard pocket for
charging a battery (through electrical contacts be-
tween the charger and the battery).
A Radio Pocket is a special pocket in which the
battery is attached to a radio, there are no ex-
ternal contacts on the battery, and the battery
is charged through electrical contacts on the
radio.
A Charging Pocket is a pocket that uses charg-
er energy for a special purpose, such as USB
charging ports.
Move the battery to a standard pocket or replace
the Radio Pocket or Charging Pocket with a stand-
ard pocket.
What to do...
Remove the battery from the pocket.
Verify that the battery is an IMPRES 2, IM-
PRES, or other authorized Motorola Solutions
Lithium-Ion battery. Other batteries will be faul-
ted.
Clean the IMPRES 2, IMPRES, or other au-
thorized Motorola Solutions Lithium-Ion battery
electrical contacts using a dry cloth.
MN002407A01-AK
69

Publicidad

loading