Motorola Solutions IMPRES 2 Guia Del Usuario página 67

Chapter 15
Charger Reprogramming
Charger reprogramming requires the Communications Interface connected to a computer using a standard
USB cable. The following messages are displayed by the charger when using IMPRES Battery Fleet
Management System to initiate charger reprogramming.
Table 24: Charger Reprogramming Display Options
Charger Display
REPROGRAMMING
REMOVE BATTERIES
REPROGRAMMING
WAITING FOR DATA
REPROGRAMMING
Progress yyy%
REPROGRAMMING
POCKET#xx FAILED
IMPRES 2
CHARGER
REPROGRAMMING
COMPLETE
Chapter 15: Charger Reprogramming
Description
Remove batteries from the charger pockets before
reprogramming.
All charger pockets are empty.
Reprogramming data is downloading. For chargers
with a display associated with each pocket, the
percentage value is the percentage of data suc-
cessfully downloaded into the pocket associated
with the display. For chargers that have only one
display (Pocket 1), the percentage value is the per-
centage of data successfully downloaded into all
six pockets.
Reprogramming failed in the identified pocket. The
identified charger pocket starts normal operations
using the previous software.
Reprogramming data download is complete. The
charging is completing the Reprogramming proc-
ess.
The Reprogramming process completed success-
fully. The charger starts normal operations using
the newly downloaded software. User-defined set-
ting is preserved after charger reprogramming has
been completed.
MN002407A01-AK
67