Motorola Solutions IMPRES 2 Guia Del Usuario página 75

3. Secure the wall bracket in position by installing mounting hardware over the mounting holes on the
wall bracket tightly.
NOTE: Motorola Solutions recommends using 10-16 X 1.5 inch tapping screw and washer (not
included) on wood stud and solid flat concrete or brick wall.
4. Hang the multi-unit charger to the designated wall bracket as shown in the following images.
Figure 31: Charger Mounted on Wall Bracket
Item
1
Chapter 18: Mounting Multi-Unit Charger to Wall Bracket
1
Description
Wall
MN002407A01-AK
75