cecotec DRUMFIT INDOOR EOLO Manual De Instrucciones página 30

ENGLISH
lower the saddle to the desired height, and tighten the knob.
Adjusting the handlebar
- Make sure the handlebar height is approximately at the same height as the saddle.
Remember that this parameter will depend on the biomechanics and physiology of the
user. If you feel uncomfortable in this position or your knees touch the handlebar, you
should increase the height slightly.
- To adjust the handlebar height, simply loosen the L-shaped adjustment knob (5), adjust the
handlebar to the desired height, and tighten the knob.
Information on the chest strap
Chest strap parts (Fig. 5):
A.
Sensor
B.
Strap structure
C.
Transmitter
D.
Battery compartment
E.
Elastic band
Specifications
1.
5.4 kHz and 2.4 GHz signals transmitted together to be compatible with multiple devices
on the market.
2.
Heart rate detection range: 40-240 beats per minute.
3.
Uses one CR2032 battery. The battery can last 6 months if used one hour a day.
How to wear the chest strap
1.
Insert one end of the elastic band (E) into the hole of the strap structure (B).
2.
Moisten the sensors (A).
3.
Now wrap the elastic band around your chest and insert the other end of the elastic band
(E).
4.
Adjust the elastic band (E) so that if fits snugly around the torso and does not move but
does not cause discomfort.
5.
The strap should be placed on the lower part of the chest as shown in Fig. 6.
When the sensor does not detect a pulse for more than 12 seconds, it automatically enters
power saving mode.
To change the battery, you can use a coin or a screwdriver that fits into the slot in the battery
compartment to unscrew it. The battery must be inserted with the "+" sign in contact with the
58 DRUMFIT INDOOR EOLO
battery cover. Once replaced, screw the cover back on.
WARNING
: the heart rate sensor requires the skin or sensors to be moist and free of a
dense layer of body hair in order to function properly.
Display information. Fig. 7
1.
: if this icon is lit, Bluetooth is enabled.
2.
STOP: if this icon is lit, the machine is stopped.
3.
START: if this icon is lit, the machine is on.
4.
SCAN: when training, the SCAN mode will display the following functions
(each function will remain on the display for 6 seconds): TIME-SPEED-RPM-DISTANCE-
CALORIE-PULSE-WATT. You can set the desired function by pressing the button.
5.
LEVEL: it displays the resistance of the current level.
6.
TIME: it displays the elapsed training time in minutes and seconds. The console will
automatically count the time from 0:00 to 99:59 in one second intervals. You can set the
value from 01:00 to 99:00.
7.
SPEED: it displays the speed training in km/h.
8.
RPM: it displays the pedalling frequency.
9.
DISTANCE: it displays the distance travelled during each training up to a maximum of
99.99 km. You can set the target distance from 1 to 99.00 km.
10.
CALORIE: it displays the total number of calories burned during training. Counts from
0 to 9999. You can set target calories from 10 to 9990.
11.
PULSE: it displays heart rate during training in beats per minute. You can set the
target heart rate from 80 to 180.
12.
WATT: it displays the amount of mechanical power the console receives from your
training.
Operation
1.
Turn the knob to choose between the different programmes (1-14). Next, press the button
ENGLISH
DRUMFIT INDOOR EOLO 59