Descargar Imprimir esta página

KNF Yamato RE212-G Manual De Instrucciones página 116

Rotavapor

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 258
6. MAINTENANCE PROCEDURES
Precautions before Inspection
WARNING
 Be sure to disconnect power cable before conducting inspection and maintenance.
 Never attempt to disassemble unit.
Precautions in Daily Maintenance
CAUTION
 Clean unit using soft damp cloth. Never use benzene, paint thinner, scouring powder, scrubbing
brush or other abrasives and solvents to clean unit. Superficial damage and/or discoloration, as well
as deformity to some components may result.
Maintenance and Inspection
 Check power plug for damage
・Check power plug for dust or dirt on its prongs, and clear off if any accretions found.
・Confirm that the prongs of power plug are not bent or damaged. Replace if bent or damaged.
・Check the power plug for discoloration or abnormal heat generation. If there is discoloration or
abnormal heating, the internal contact of the outlet may be faulty.
 Pay attention to the sound of motor
If there is an unusual noise comes from motor, contact original dealer of purchase.
◆ Contact original dealer of purchase if further questions arise concerning maintenance procedures.
30
DE
EN
FR
ES
IT

Publicidad

loading