Publicidad
Idiomas disponibles
Idiomas disponibles
5. HANDLING PRECAUTIONS
Warnings and Cautions
WARNING
Exercise caution when handling flammable chemicals.
Unit is NOT fire or blast resistant. When processing flammable samples, be sure to
provide adequate ventilation and not to allow anything that may be a source of fire or
ignition (static electricity, etc.) approached. Do not use this unit in an atmosphere of
substances shown in LIST OF HAZARDOUS SUBSTANCES (P.44). Never vaporize
explosive substances.
Turn OFF (○) power immediately when an abnormality occurs.
If unit begins emitting smoke or abnormal odours for reasons unknown, turn OFF (○)
power immediately, disconnect power cable from power supply, and contact original
dealer of purchase for assistance. Continuing to operate without addressing abnormalities
may cause fire or electric shock, resulting in serious injury or death. Never attempt to
disassemble or repair unit. Repairs should always be performed by a certified technician.
CAUTION
Select appropriate gasket for organic solvents
Although included standard vacuum seal has tolerance to chemicals, it may swell or
become deteriorated depending on the types of solvents and conditions of use. In such
cases, use of optional PTFE vacuum seal is recommended.
(See "Fehler! Verweisquelle konnte nicht gefunden werden." P.Fehler! Textmarke
nicht definiert.)
Use caution not to spill samples on equipment
When sample spilled over RE unit, wipe it dry with a clean dry cloth. Failure to do so may
cause coating to peel or corrode.
Inspect regularly.
Regular inspection and maintenance are highly recommended to ensure proper
operation. See "Inspection and Maintenance" (P.30)
Power loss recovery
When a power loss occurs during operation and then restored, unit may resume operation
or remain on standby. These actions can be selected through user setting. See "Auto-
resume Function" (P.25) for setting procedure; default setting is "OFF".
29
Publicidad
