12.BC102-G Instruction manual
Installation Procedure (Accessories)
By attaching the accessory wraparound
prevention plate to this unit, you can cover the
drive part of RE212-G and suppress the
wraparounds of operators hair. Install it if
necessary.
Slide the wraparound prevention plate from the
RE212-G side, align the slotted hole of the
wraparound prevention plate with the screw
hole in the lid, and fix it with the knurled screw.
If you loosen the knurled screw, you can slide
the wraparound prevention plate by about 15
mm. Determine the fixing position in
consideration of the distance from RE212-G.
Wraparound prevention plate
Wraparound prevention plate
Slotted hole
41
Knurled screws
Screw hole