Publicidad
Idiomas disponibles
Idiomas disponibles
3. PRE-OPERATION PROCEDURES
Installation Procedure
7. Installing bath guide
Attach supplied bath guide to main unit stand
base.
(1) Insert bath guide into the slot on bottom of
stand base.
The bath guide slots are positioned on
both right and left. Choose the side on
which an evaporation flask is to be
attached.
8. Installing condenser bracket
(1) Remove two cap bolts (black) on motor
box with supplied hex wrench.
(2) Attach condenser bracket with the cap
bolts removed.
Bath guide slot
Cap bolt (black)
17
Bath guide
Hex wrench (included)
Motor box
Condenser bracket
Publicidad
