Descargar Imprimir esta página

KNF Yamato RE212-G Manual De Instrucciones página 90

Rotavapor

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 258
1. SAFETY PRECAUTIONS
Warnings and Cautions
Turn OFF (○) power immediately when an abnormality occurs.
If unit begins emitting smoke or abnormal odours for reasons unknown, turn OFF (○)
power immediately, disconnect power cable from power supply, and contact original
dealer of purchase for assistance.
Continuing to operate without addressing abnormalities may cause fire or electric shock,
resulting in serious injury or death. Never attempt to disassemble or repair unit. Repairs
should always be performed by a certified technician.
Handle power cable with care.
Do not operate unit with power cable bundled or tangled. Operating unit with the power
cable bundled or otherwise tangled, may cause power cable to overheat and/or catch
fire.
Do not modify, bend, forcibly twist or pull on power cable. Fire or electric shock may
result.
・Do not risk damage to power cable by positioning it under desks or chairs, or by allowing
it to be pinched in between objects. Fire or electric shock may result.
・Do not place power cable near kerosene/electric heaters or other heat-generating
devices. Doing so may cause power cable insulation to overheat, melt and/or catch fire,
which may result in electric shock.
・Turn OFF (○) power immediately and disconnect from facility terminal or outlet, if power
cable becomes partially severed or damaged in any way. Contact original dealer of
purchase for information about replacing power cable.
Failure to do so may result in fire or electric shock.
Always connect power cable to appropriate facility outlet or terminal.
DO NOT disassemble or modify equipment
Never attempt to disassemble or modify unit. Doing so may cause malfunction, fire,
electric shock, or personal injury. Note that any malfunction resulting from unauthorized
modifications or customizations to unit will void the warranty.
Exercise caution when handling flammable chemicals.
Unit is NOT fire or blast resistant. When processing flammable samples, be sure to
provide adequate ventilation and not to allow anything that may be a source of fire or
ignition (static electricity, etc.) approached. Do not use this unit in an atmosphere of
substances shown in LIST OF HAZARDOUS SUBSTANCES (P.44). Never vaporize
explosive substances. Fire or explosion causing serious injury or death may result.
CAUTION
DO NOT operate equipment during thunderstorms
In the event of a thunderstorm, turn OFF (○) power and disconnect power cable
immediately. A direct lightning strike may cause equipment damage, fire or electric shock,
resulting in serious injury or death.
4
DE
EN
FR
ES
IT

Publicidad

loading