Publicidad
Idiomas disponibles
Idiomas disponibles
6. MAINTENANCE PROCEDURES
Maintenance and Inspection
●Fuse replacement
If overcurrent protection fuse has blown, eliminate the cause and replace with a spare.
Fuse cap
●Fuse for inlet
① Turn OFF (○) the Power switch and disconnect power cable.
② Hook a slotted screwdriver, etc. on the tab on top of the fuse cover and pull it out.
③ Replace the blown fuse with a spare (10 A) and put the fuse cover back into the main fuse slot.
④ Plug power cable into an outlet and turn ON (|) the Power switch to make sure unit starts up.
●Fuse for outlet
① Turn OFF (○) the Power switch and disconnect power cable.
② Set the flat-blade screwdriver?? to "OFF (○)" and unplug the power cord from the outlet.
③ Turn the fuse cap counterclockwise with a slotted screwdriver.
④ Replace the blown fuse
VR connection terminal (mini-DIN 8P)
with a spare (2 A).
⑤ Put the cap back and turn it all the way clockwise.
⑥ Plug power cable into an outlet and turn ON (|) the Power switch to make sure unit starts up.
Contact original dealer of purchase for further assistance.
Fuse cover
Service outlet fuse 2 A
25
Main power fuse
10 A
Fuse cover
Fuse cap
DE
EN
FR
ES
IT
Publicidad
