Descargar Imprimir esta página

KNF Yamato RE212-G Manual De Instrucciones página 121

Rotavapor

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 258
9. SPECIFICATIONS
Model
Operating
ambient
temperature
Performance
range
*1
Speed range
Evaporation
capacity
RPM display
Rotation mode
Functions
Spring-loaded
jack
Rotary motor
Configuration
Condenser
retention
Safety functions
Cooling
condenser
Compatible
evaporation flask
Compatible
receiving flask
Standard
External
dimensions *2
Overall
dimensions *2
(Including bath)
Power rating
Power cable
Weight
Conformance standard
Accessories
*1 Performance data above based on 23 ±5 °C room temperature, 65%RH ±20% humidity, and no process load.
*2 Dimensions do not include protrusions.
*3 Applicable rotation speed range and sample volume depend on the capacity of evaporation flask.
Evaporation flask
capacity
50-500 mL
1000 mL
2000 mL
(Max. height 200 mm, stepless regulation, one-touch lock)
[DC motor]
Motor overload protection, overvoltage, low voltage, rotation speed sensor error
[AC adapter]
Short circuit in internal circuit, overcurrent protection, overvoltage protection
Suction Port: GL-14 (upper), Φ10 nozzle
Cooling port: GL14 (two places in lower part), two φ10 nozzles
RE212-G: 200-230 VAC single phase 1 A – 50/60 Hz
[Main unit]
Instruction manual (1), AC adapter (1), power cable (1),bath guide (1)
rear cover (1), double-sided tape fastener roll (1), Condenser bracket (1), Handle
extension adapter (1)
[Glass set]
Cooling condenser (type F)(1), Vapor Tube (1), evaporation flask (1),
receiving flask (1), ball joint clamp (1), flask clip (1),
vacuum seal (1), condenser insulation kit (1), flask removal tool,
single-sided tape fastener roll (1), hex wrench (1) condenser bracket (1),
Liquid samples
Sample volume (mL)
Flask capacity ÷ 2
RE212-G
5-35 °C
5-315 rpm *3
Up to 23 mL/min
Digital display/ Control knob setting
Forward/Reverse/Auto inversion
Manual balance
DC brushless (simple servo)
Retaining bracket for vertical condenser
Double corrugated tube
(cooling surface: 0.143 m
50-2000ml for
100-2000 mL
529W×324D×745H
554W×365D×745H
Approx. 0.7m with inlet plug
Approx. 9.0 kg (including RE unit)
Rotation speed
Sample volume (mL)
(rpm)
315
Flask capacity ÷ 2
150
35
2
)
NS
29
Powdery samples
Rotation speed
Not available
(rpm)
315
150

Publicidad

loading