Publicidad
Idiomas disponibles
Idiomas disponibles
A beep sounds as soon as the appliance has been connected to a socket.
The appliance is ready for use.
.. Selecting the operating mode
...
Mixing only mode
Turn the dial
7
4
The stirrer
begins the mixing process without cooling the food. The default
time is 30 minutes. Once the default time has elapsed or if the food is too hard, 10
beeps sound. The mixing process without cooling is now complete.
Turn the dial to
...
Cooling only mode
Turn the dial to
The compressor and cooling fan start cooling the food. The default time is 30 min-
utes. Once cooling is complete, 10 beeps sound. The cooling process is now com-
plete.
Turn the dial to
...
Ice cream mode
Turn the dial to
The compressor, the cooling fan, the motor block
2
the drive shaft
short beeps sound. Ice cream preparation is now complete. The ice cream is ready
to eat.
Turn the dial to
If ice-cream -making process is complete, but no further operation is carried out,
automatic cooling occurs. The compressor starts automatically every 10 minutes
and cools for 10 minutes to maintain the taste and consistency of the ice cream.
The cooling function lasts for max. 1 hour. Once the cooling function ends, 10 short
beeps sound; then the appliance switches off automatically.
Turn the dial to
If the ice cream hardens, the drive shaft of the motor block can become
jammed. In this case, the motor protection function switches off the
drive to prevent damage to the appliance.
If the motor block has not been inserted correctly, 10 beeps sound every
30 seconds in mixing only mode and ice cream mode. The alarm is re-
peated 10 times. In this case, you must insert the motor block and lid
again correctly. Otherwise, the appliance enters standby mode.
to
.
to end the process.
.
to end the process.
.
are started to make ice cream. If the ice cream is finished, 10
to end the process.
to end the process.
1
incl. the stirrer mounted on
DE
FR
NL
ES
IT
EN
155
Publicidad
