Publicidad
Idiomas disponibles
Idiomas disponibles
Baker GA 950 / GA 550
Selection and Start of a Program
Selection of Ending Time for the Program
A menu is opened in which the ending time for the program is selected, and the default setting of "Weekday" must
be confirmed. The usual ending time for programs can be established in the menu Settings for the unit
as a default value for each weekday (see the section entitled "Default ending times for programs for each
weekday").
If the ending time established for the program is correct, then
the program can be started by choosing "Weekday" (Monday,
Tuesday, etc.). The program only starts if there is sufficient time
remaining between the time for the starting and ending times
for the schedule for the sum of the programmed program
sections (phases). Otherwise, the earliest possible ending time
for the program is shown.
To switch out of the display, press on "Ready at".
Changing of Established Date and Ending Time for the Program
Press on the "Calendar" button. The calendar menu will be displayed. Here, the date can be changed by touching the
date fields. Selections for changing the time can be opened by touching the time window. Here, the time can be
entered and then saved with "OK". By selecting you exit the menu without making any changes. With "OK" you exit
the menu and start execution of the program.
To start a preconfigured program without changing the settings,
you press the button on the keyboard with the symbol "Master". The
selected symbol is shown with a blue edge, and the "Settings" button
is shown in blue, which means that it has been activated.
Further touching of the Master symbol opens a window with an
ending time for the program (ready at) on the following day.
EN
15
Publicidad
