Publicidad
Idiomas disponibles
Idiomas disponibles
Baker GA 950 / GA 550
Remember that the preconfigured programs in the bookmarks cannot be themselves!
Deletion of a Specially Created Program
Select program, blue frame is displayed, after which you continue to
press until a new menu item is displayed. You can now select
"YES" or "NO" for deletion. The program is deleted by selecting "YES",
whereas it continues to be available by selecting "NO".
Manual Programs
The display start page will save up to four different symbols. You can
activate each one of these program phases separately to for example
use the unit as a storage freezer or solely as a proving machine.
Procedure at the start of the phases:
➢ Select the desired program, and press once, until a blue frame is displayed.
➢ Then press the
➢ Exit the menu with the symbol OK. For further steps in connection with execution, storage and
interruption, please see page 14-15.
➢ Exit the menu without saving with the button "<".
Alarms/Error Messages
If an error arises, an error message window is displayed on the screen.
In order to acknowledge this alarm, you must touch the alarm window
(the area with the black background).
Then a red triangle is shown on display for the currently executing
program until the error is remedied. Depending on the priority of the
error, the program will continue with an emergency program, or it will
be interrupted.
IMPORTANT
symbol at the bottom to the right, and set the settings accordingly.
EN
20
Publicidad
