Pool Settings Menu - Aqua SALT Cella 50 Manual De Instrucciones

AQUA SALT
Salt chlorine generator
Last
modification
date
It shows the date of Switches to the Pool
the last modification to Settings submenu
at least one of the
system parameters
Programming
Switches to the Switches
Programming Menu recirculation
settings Menu
This menu sets some parameters of the pool and other operation characteristics:
4.5.1

Press F to scroll the menu sections
Pool

Press and hold Enter for more than 1 second to go back to the Pool Settings section of the Installer
settings
Menu.
menu
Sets the amount of water contained in the pool, with progressive increases of 0.5 cu. m or 100
Pool capacity
gal.
Selects the work mode of the chlorine generator choosing among "internal timers", "external
Generator
timer", "proportional"
operation
Sets the delay time associated to water flow detection in the system, from 1 to 300 seconds.
Flow filter
Default value: 10 seconds
ADSP7000648
modification
Comunication
Alarms
Timer
Recirculation
timer
Programming *
Pool settings
System settings
Switches
System
submenu
Recirculation
timer
to the Switches to the menu
timer to set the timers on
"Internal timers" work
mode
Cover filter
Flow filter
rev. 1.4
MAINTENANCE AND INSTRUCTION MANUAL
Last
Pool
settings
System
settings*
Chlorine/Redox
calibration*
pH
Calibration*
Chlorine/Redox
calibration
to the Switches
Settings submenu to calibrate
chlorine or
probe
Timer
Alarms
Switches
Alarms
enable or disable the
alarms
Type of Pool
Pool capacity
Generator
operation
31/07/2017
pH Calibration
to the Switches to
submenu to calibrate
Redox the pH probe
Communication
to the Switches to
Menu to Communication Menu
ENGLISH
the
76
the
76/264