Alarms Menu; Communication Menu - Aqua SALT Cella 50 Manual De Instrucciones

AQUA SALT
Salt chlorine generator
The Alarms Menu allows to enable or disable the alarms. Read more about the Alarms menu sections at section
4.5.9
5.
Alarms 
Press and hold Enter for 1 second to go back to the "Alarms" section of the Installer Menu.
Menu
Cell
Replacement
Cell Service
Current alarm
Temperature
probe alarm
The Communication Menu modifies some characteristics about the communications between the
4.5.10
device and the user programme installed on the PC.
Communication

Menu
Connection
Type
Modbus
Address
ADSP7000648
Cell
replacement
alarm reset
Cell Service alarm
reset
Enter
Enter
Cell maintenance
Confirm? Yes/No
Salinity level
alarm
Salinity OFA
alarm
Press and hold Enter for one second to go back to the Communication section of the Installer
Menu.
Connection
type
Modbus
address
rev. 1.4
MAINTENANCE AND INSTRUCTION MANUAL
Acoustic
Alarm
Recirculation
pump alarm
Cell replacement
Confirm? Yes/No
OFA pH
alarm
pH level alarm
Select how to connect the control box of the device to
the PC. You can choose among:

RS232

Bluetooth
Select the address within the range 1-99 used in the
Modbus communication protocol. It is recommended
not to change the default value (1)
31/07/2017
Low
production
alarm
Insufficient
production
alarm
Over salt
alarm
Ice alarm
OFA Cl/Rx
alarm
ENGLISH
83
83/264