Safety Devices; Transport; Installation; Installation Place - SICE S 45 Manual De Instrucciones

ENGLISH • Instructions manual
WARNING!
Unauthorized variations or modifications to the machine shall relieve the manufacturer from all liability for any
deriving damages or accidents.
In particular, removal or tampering with the safety devices represents a violation of the Labour Safety
regulations.
S 45 tyre changer is equipped with a pneumatic built-in safety valve.
This valve prevents pressure coming from inflating gauges, or other inflating devices con-
nected to the tyre changer, to exceed 3.5 bar.
S 45 GP version is moreover equipped with a pressure relief valve (1, Fig. A), located on
the outside tank, set at 11 bar. This valve is activated every time the pressure inside the
tank tends to exceed 11 bar.
WARNING: Removing or tampering with the safety devices is in
violation of European safety regulations and relieves the
manufacturer from all liability for damage caused by or related to
such actions.
The machine is delivered in a carton box with pallet.
Shipping weight is:
- S 45: 305 kg.
- S 45 GP: 323 kg.
The machine must be handled with a fork-lift truck with the forks positioned as shown in
the figure B.
Position the tyre changer, still in its packing, in the chosen installation site.
Remember that:
1- The machine's workplace requirements are 1340 mm wide x 1640 mm (depth) with at least 500 mm of clear space from any wall.
2- The floor must be solid, level and able to bear the weight of the machine without yielding.
3- The installation site must be equipped with an electrical system with an efficient grounding circuit and automatic differential circuit-
breaker with 30 mA setting.

4. SAFETY DEVICES

5. TRANSPORT

6. INSTALLATION

6.1 INSTALLATION PLACE

35
1
A
B
S 45