1 PREFACE
This manual contains information on how to
work with the forklift truck in a safe way and how
to keep the truck in good condition. Safety is an
essential part of operating a forklift. You must
look out not only for your own safety but also
the safety of those around you. Before using the
truck, the owner and the operator should read
the entire manual carefully.
Be sure to read the Operator Manual of each
forklift model that you operate.
We are constantly developing our products. We
therefore reserve the right to make
modifications at anytime without prior notice.
If you need additional copies or replacement of
this manual, contact the Service Centre. If there
is anything unclear or if you have any questions,
contact the Service Centre.
Service Centre shall be intended as a service
centre authorized by the forklift truck
manufacturer.
Abbreviations
• IC trucks stands for Internal Combustion
trucks ( diesel and LPG)
• EP
trucks
stands
for
Electric-Powered
trucks (battery-powered)
1.1 Manufacturer
Manufacturer is indicated on the Operator
Manual of your forklift truck.
1.2 Reference directives and
standards
Below the list of the reference directives and
standards described in this manual.
Machinery Directive (MD) 2006/42/EC
Low Voltage Directive 2014/35/EU
Electromagnetic compatibility Directive (EMC)
2014/30/EU
1 PREFACE
Directive 2006/66/EC on batteries and
accumulators and waste batteries and
accumulators
Directive 95/63/EC concerning the minimum
safety and health requirements for the use of
work equipment by workers at work
EN ISO 3691-1 :2015 Industrial trucks - Safety
requirements and verification
ISO 22915:2008 Industrial trucks - Verification
of stability
ISO 13284:2003 Forklift trucks - fork-arm
extensions and telescopic fork-arms
EN 12895:2015 Electromagnetic Compatibility
ISO 6292:2008 Powered industrial trucks and
tractors - Brake performance and component
strength
EN 16842:2017 Powered industrial trucks -
Visibility
en-3