2
Use in potentially explosive atmospheres
Special regulations must be observed in potentially explosive atmospheres as regards the
power supply, signal input / output and ground connections.
All parts must be installed in accordance with the manufacturer's specifications, as well as
relevant standards and regulations.
Commissioning and operation must comply with EN 60079-14 (Electrical apparatus for
explosive gas atmospheres).
2.1
Approvals
Data relating to the approvals for use in potentially explosive atmospheres can be found in the
chapter 'Ex relevant specification'.
2.2
Ex relevant specifications
See chapter 'Ex relevant specifications' on page 50.
CI/FMT500-IG-X1
Use in potentially explosive atmospheres
Sensyflow FMT500-IG
EN - 13
67