Assembly; Assembling The Bus Coupler On The Valve System; Dimensions - Aventics CANopen Instrucciones De Servicio

102 AVENTICS | CANopen | R412005742–BDL–001–AD

Assembly

Fig. 5: Dimensioned drawing for valve system with bus coupler
6 Assembly
6.1 Assembling the bus coupler on the valve
system
You will receive your individually configured valve system
HF03 LG or HF04 series completely fitted with all components:
Valve terminal
W
Bus coupler
W
I/O modules (if needed)
W
The operating instructions accompanying the VS describe in full
how to assemble the entire valve system. Any mounting
orientation may be used with the VS. The dimensions of the
complete VS vary according to module equipment (see Fig. 5).
6.1.1

Dimensions

A + (60 x m)
B + (60 x m)
60 60 9