Bridging Function; Cooking Zones Timer - GUTMANN VIENTO Instrucciones De Uso

OPERATION MANUAL

4.17 Bridging function

1. 1. Switch on the hob and position a pot on the
2. Press the two cooking zone selection keys of the
3. 3. Activate the front and back cooking zones si-

4.18 Cooking zones timer

1. Precondition: Pot is placed on the corresponding
2. Select the corresponding cooking zone. Timer in-
3. Then use the Plus key or the Minus key to set
The front and the rear cooking zones may be ac-
tivated together for a cooking process (bridging
function). This enables larger cookware to be
used.
cooking zones that have to be bridged.
front and back cooking zones simultaneously to
activate the bridging function. The bridging func-
tion has been switched on and the back power
level setting shows the bridge . Operation is car-
ried out with the front power level setting and the
sensor field
multaneously again or switch the hob off to deac-
tivate the bridging function. The cooking zones
are split into 2 separate zones again.
Please note
The roaster or the pot will need to cover at least
half of the cooking zones used in order to be
recognised by the pan recognition device!
Cooking zone timers can be used to switch a
cooking zone OFF automatically after the set ti-
me has run out.
It can be adjusted within a range of 1 min to 9 h
59 min.
During the time is running, the cooking zone can
be operated normally, i.e. changing the cooking
level is possible.
Each cooking zone has an independent timer, i.e.
an individual time selection per cooking zone is
possible.
zone and a cooking level has been set to this
cooking zone
dication displays shows "---". Press the timer dis-
plays.
the required time.
Centre position: every 10 minutes
Right position: every minute
After a few seconds, the entry will be taken over
and the time will be running.
The timer symbol of the cooking zone lights up.
Left position: hours
Centre position: every 10 minutes
Right position: every minute
After a few seconds, the entry will be taken over
and the time will be running.
The timer symbol of the cooking zone lights up
The timer starts counting backwards. If it has
reached 0, a signal tone will be emitted; the timer
displays show 000 and the corresponding coo-
king zone will be turned OFF. Touch an arbitrary
key to disable the signal tone.
EN
55