Power Boost; Power Management - GUTMANN VIENTO Instrucciones De Uso

OPERATION MANUAL

4.23 Power boost

1. Switch on the hob. Use the power setting
2. Touch the
3. Power boost function is de-activated auto-

4.24 Power management

The power boost setting makes additional
power available for induction cooking zo-
nes. A large quantity of water can be
brought to the boil very quickly.
display ( as a key ) to select a cooking zo-
ne. The stand-by dot of the cooking zone
selected will light up.
symbol on the slider area. The
booster for the selected cooking zone is ac-
tivated. The display for the cooking zone
shows a " ".
matically after 5 minutes.
Please note
Press the sensor field slider to prematurely
de-activate the power boost.
For technical reasons two cooking zones
(i.e. front left + rear left, or front right + rear
right) always comprise a module and have
a maximum power level to prevent the
mains connection from overloading.
The power management is prioritizing, i.e.
the cooking zone which heating power has
been increased at last will get the desired
heating power and the other cooking zone
of the same module will be reduced in its
heating power. Additionally, the reduction of
power will be signalled by flashing.
EN
59