In all cases avoid the use of products containing aggressive agents (bleach, ammonia, etc.), and avoid the use
of abrasive materials, such as brushes, steel wool and knife blades, to remove any stains.
5.3. LUBRICATION
Figure 13 shows the points that require lubrication, which can be carried out simply using:
1/2 drops of oil of medium
viscosity for
a thin coating of multi-use
water repellent grease for
5.4. MAINTENANCE REGISTER
Date
MERCURY
lever operating the legs
release ratchet of the rear and front piston
Figure 13
Description of works
37
Mechanic
Rev.08 140722