Decommissioning And Demolition; Decommissioning; Differentiated Subdivision Of Materials; Disposal - Mercury 7070 PROOF Manual De Instrucciones Para Uso Y Mantenimiento

6. DECOMMISSIONING AND DEMOLITION

6.1. DECOMMISSIONING

At the end of its useful life the stretcher must be decommissioned. Proceed as follows to sort the various components.
The nameplate identifying the stretcher must be destroyed. It is absolutely forbidden to use such a plate
on other stretchers, even if they are identical.

6.2. DIFFERENTIATED SUBDIVISION OF MATERIALS

The materials listed below must be subdivided and stored for eventual re-use or disposal, respecting environmental regulations.
Material
Stainless steel
Standard steel
Aluminium alloy
Plastic
Standard steel
Aluminium alloy
Plastic

6.3. DISPOSAL

All these materials must be disposed of according to the regulations in force in the country at the time of demolition. For correct
disposal, use specialist services authorized to collect and treat such material, or apply to the competent authorities for places and
procedures.
In all cases do NOT demolish in the environment.

7. TECHNICAL ASSISTANCE

7.1. ADDRESSES FOR TECHNICAL ASSISTANCE

For assistance under guarantee and/or a request for maintenance or repair work, or for information, the client can use the ME.BER.
Technical Assistance Service applying to:
ME.BER. S.r.l. Unipersonale - Via Langhirano, 270 - 43124 Fontanini (PR) ITALY
+39 0521 648770
+39 0521 648881
We recommend that, before contacting our Technical Assistance service, the client consult carefully this manual
If the use of this service is required, it is necessary to specify clearly the type and nature of the problem encountered, to enable us to
provide the appropriate materials.
MERCURY
Main frame, loading trolley, rear legs, front legs and mechanical pistons, wheel
brackets
Bolts, pins, springs, gas springs.
Tubular structure of footrest, casts, lever releasing the legs, side and rear handles.
Buffers on the front and rear legs, backrest, gluteal area, foot area, handles and
wheels, mattress and belts.
Main frame, loading trolley, rear legs, front legs and mechanical pistons, bolts, pins,
springs, gas springs.
Piston semi-shells, handles, leg-supporting pins and closing plugs of the leg pipes.
Buffers on the front and rear legs, backrest, gluteal area, foot area, handles and
wheels, mattress and belts.
Phone
+39 0521 648780
Components
Fax e-mail/website
contact@meber.it
www.meber.it
38 Rev.08 140722