SURE petcare SureFeed Manual Del Usuario página 19

Portion indicator lights
Please be aware if you haven't set a portion weight in the app, the portion indicator
lights will not illuminate when food is added to the Feeder.
Food still left in the bowl?
If there is food still left in the bowl when it comes to dinner time, no need to press the zero
button, simply add more food to the feeder and the feeder will let you add a new portion on
top of existing food in the bowl. The portion indicator light will allow for a full portion amount
to be added and indicate as such.
1
When you open the lid, some lights will
momentarily flash on to indicate that the
feeder knows there is some food left in the
bowl. All lights will then disappear to allow
you to add a new fresh portion on top of the
remaining food.
Zeroing light sequence:
Descending green lights from right to left appear when you
press the zero button.
Adding food:
As food is added, the portion indicator lights will light up
green, increasing from left to right. The lights correspond
to the amount of food in the bowl. You need to keep adding
food until all the lights flash.
Reaching the portion weight:
When you are within +/- 1 g of the portion weight, the lights
will flash green. If the lights aren't flashing, it is not quite
a full portion.
Overfilling:
If you add more than the portion weight to the bowl,
the red lights will warn you how much you've overfilled.
Simply remove some of the food until you see the flashing
green lights.
2
Fill the bowl until all the portion indicator
lights are flashing green.
EN
18