Connect Your Feeder - SURE petcare SureFeed Manual Del Usuario

Connect your Feeder

In order to complete the setup of your connected system, you need to connect your Feeder
to your Household.
1
Place your Feeder in its
intended location. This is to
ensure it can communicate
with the Hub.
4
Press the settings button '
on the Feeder once. The ear
LED will illuminate green.
Adding a Feeder to your current Household
You can add a Microchip Pet Feeder Connect to your existing Sure Petcare
Household via the app. Go to the Household section and follow the instructions
above.
You can also assign your pet's microchip ID remotely via the app. This means
you won't have to add them manually. However, adding pets using treats can
encourage them to use the new product. See page 15 for more information
on adding pets.
2
Sure Petcare
App!
On the Sure Petcare app,
select 'Add product'.
5
Once the Feeder is
'
connected the LED
will turn off and the Hub
will stop flashing.
3
Your Hub will go into
connecting mode and
its ears will flash green.
30cm
If you wish to connect more
Feeders, you can do this easily
from within the app.
EN
12