Description And Technical Data; Performance Description; Proper Use; Improper Use - Hupfer SPTW-2/EBF/TEHCO Manual De Instrucciones

Chapter 3
Page 12
3

Description and Technical Data

3.1

Performance Description

The food transport trolleys are a complete system for the transport and distribution of meals. They hold up
prepared meals and keep them warm. Food in gastronorm containers can be either put into bain-marie wells
or gastronorm containers, on grids or into baskets in heated cupboards. When switched off and with the use
of a cold storage plate, the cupboard compartments can also be used for cold meals and cold side dishes,
e.g. salads, bread, cold cuts and desserts. Bain-marie wells and heated cupboards are thermally insulated
from each other.
Food transport trolleys are mainly used to store, transport for short distances and distribute hot meals. They
can be used everywhere, where the use of tray systems is not efficient and the free choice of a portion size
is a particularly important decision criterion. The number of persons depends on the number of menu com-
ponents.
The heated plate dispensing tube with cover, the storage place for ladles and the neutral compartment pro-
vide sufficient space-saving storage options to store and transport all of the utensils required by the operat-
ing staff as well as all of the crockery/cutlery required for the guest in a single appliance.
3.2

Proper Use

Food transport trolleys are intended for storing hot meals and for keeping meals warm. It is not possible to
heat up cold meals or to cook products which have been introduced in the warm state.
Food transport trolleys are only intended for the transport of meals in gastronorm containers or portioned
meals on grids or in baskets.
The plate dispensing tube of the food transport trolley is intended for dispensing round crockery items made
of porcelain or toughened glass. It is also possible to transport crockery, cutlery and napkins in suitable
transport containers or on trays in the neutral compartment.
Food transport trolleys are only intended for the transport for short distances. When transporting for longer
distances, connect the appliance to a power supply, switch the heating on and reheat the meals at regular in-
tervals.
When cooling meals or the components it is necessary to comply with the respective legal directives on food
storage (duration and temperature).
The intended use means the predetermined procedures, compliance with the indicated specifications and
use of the delivered or additionally available original accessories.
Any other use of the appliance is considered as unintended use.
3.3

Improper Use

It is not permitted to use food transport trolleys for cooking food or keeping it warm, for room heating and
drying the crockery.
The maximum duration of transport of hot meals shall in no case be exceeded between two heating stages.
Do not transport any loads on the hinged lids of the appliances, because transported objects are not secured
to prevent them falling down.
Transport of persons is not permitted.
In no case may people sit or stand on the appliance.
It is not permitted to heat dry the bain-marie wells
The plate dispensing tube is not designed to heat and store plastic crockery, top and bottom parts of plastic
insulated sets or plastic-coated items used to keep food warm. Owing to the high temperatures of the heat-
ing elements, the plastics can melt and catch fire.
Any other use, especially loading the food transport trolley with other loads as given, is not permitted.
The manufacturer and suppliers are not liable for any consequential damage resulting from unintended use.
No liability is assumed and no warranty claims can be submitted for damages caused by improper use.
Food transport trolley
SPTW-2/EBF/TEHCO
Description and Technical Data
Performance Description
91319926_A0