Zero Balance; Installation Dependent On The Temperature Of The Medium Being Measured - ABB CoriolisMaster FCB300 Serie Instrucciónes De Puesta En Marcha

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 165
4.6.8

Zero balance

Before adjusting the zero under operating conditions, make
sure that:
— The meter tube is completely full
— There are no gas bubbles or air in the meter tube (in case
of liquid measurements)
— There are no condensates in the meter tube (in case of gas
measurements)
— The pressure and temperature in the meter tube are
appropriate for normal operating conditions
We recommend installing a bypass line to ensure that these
conditions are met. Installing a bypass line means that
adjustment can take place while the process is ongoing.
Fig. 13: Bypass line
18 - EN CI/FCB300-X1 Rev. C | CoriolisMaster FCB330, FCB350
B
A
G10311
4.6.9
Installation dependent on the temperature of the
medium being measured
The mounting position of the flowmeter sensor is determined
by the temperature of the medium being measured T
Be aware of the following mounting options!
Fig. 14: Installation at T
medium
Fig. 15: Installation at T
medium
medium
G10066
-50°... 120 °C (-58 ... 248 °F)
G10067
-50°... 200 (-58 ... 392 °F)
.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Coriolismaster fcb330Coriolismaster fcb350

Tabla de contenido