Disconnecting Hoses; Uncoupling The Machine From The Tractor - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

5.1- Disconnecting hoses

Before disconnecting the hydraulic hoses from
1.
the tractor valves, it is necessary to relieve the
system pressure. To do this, turn off the tractor
and then repeatedly push the levers, easing
the system.
With the control levers in the neutral position,
2.
pull the hoses quickly: the disconnection will
occur with minimum oil loss.
Then, reinsert all the protective caps (A) and
3.
the tractor valves.

5.1- Uncoupling the machine from the tractor

Choose a flat location to uncouple the machine from the tractor.
Be aware when performing this procedure there is a risk of personal injury.
ƒ Turn off the power take off;
ƒ Park the machine on a level and sturdy ground;
ƒ Engage the tractor's parking brake;
ƒ Lower the machine to the ground;
ƒ Turn off the tractor engine;
ƒ Disconnect the hydraulic hoses (as instructed in the previous item);
ƒ Remove the cardan shaft;
ƒ Disengage the tractor machine.
A
Instructions Manual
5. Operation
57