Fly Indexer Settings; Settings To Make Before Using The Fly Indexer - Brother RH-9820-02 Manual De Instrucciones

4
Fly indexer settings (Refer to pages 28 - 31.)
Use the operation panel to carry out the settings relating to the fly indexer.

4-1. Settings to make before using the fly indexer

1
While pressing the TEST key and the PROGRAM key, push the POWER switch at the ON side (1).
0598B
2
Set the memory switch number (2) to "572".
0413B
3
Change the setting value (4) to "ON".
0414B
4
Apply the changed setting.
0415B
5
・ To continue changing other settings, go to step 2 of "4-2. Setting the number of holes for the fly indexer and the fly
setting position" on the next page.
・ Once this operation is finished, press the TEST key.
0448B
28
* The display will change from flashing to illuminated, and this means
that the setting has been applied.
RH-9820 FLY INDEXER
(3)
(2) Memory switch number
(3) Setting for selected number
(4) Setting value
(2)
(4)
Illuminates
(2)
(4)
0730B
0918B
0917B
0917B