Honda Motor EU65is Manual De Instrucciones página 272

cap.04 EU65is 6500is (Eu).qxd 07.12.17 4:46 PM ページ4-2
2. AIR CLEANER
a. DISASSEMBLY/REASSEMBLY
Remove the left maintenance cover (P. 4-1).
[1]
SILENCER CHAMBER
[19]
4.5 x 8 x 610 mm
VINYL TUBE
(AIR VENT TUBE)
INSTALLATION: P. 4-3
[18] TUBE CLIP C8 (2)
[17]
4.5 x 8 x 400 mm VINYL TUBE
(CARBURETOR DRAIN TUBE)
INSTALLATION: P. 4-3
[16] TUBE CLAMP (3)
INSTALLATION:
P. 4-3
[15]
AIR CLEANER
ELEMENT
CLEANING: P. 3-4
[14] AIR CLEANER
COVER SEAL
[13]
AIR CLEANER
COVER
[12]
AIR CLEANER COVER BOLT (2)
2.3 N . m (0.2 kgf . m, 1.7 Ibf . ft)
4-2
[3]
SILENCER CHAMBER SEAL
[2]
6 mm FLANGE NUT(2)
8.5 N . m (0.9 kgf . m,
6.3 Ibf . ft)
6 x 23 (3)
[4] COVER CLIP (4)
[5] SILENCER COVER
[7]
54 mm AIR CLEANER
CONNECTING TUBE
BAND (2)
0.7 N . m (0.1 kgf . m,
0.5 Ibf . ft)
[8] AIR CLEANER
CONNECTING TUBE
[9] FLAME TRAP
INSTALLATION:
Note the installation
direction.
[11] AIR CLEANER CASE
INSTALLATION:
Insert the intake port of the air cleaner
case into the separator seal B on the
front frame as shown.
[11]-2 INTAKE PORT
[6]
COLLAR (3)
[10]
INTAKE AIR GUIDE
TUBE
[11]-1
SEPARATOR
SEAL B
[11]-3
INTAKE AIR
GUIDE TUBE
[11]-4
FRONT FRAME