How To Replace The Sharpening Stone - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

6.1- How to replace the sharpening stone

Replace the sharpener stone when you find that
it has lost its sharpening ability.
ATTENTION!
Turn off the tractor and remove
the ignition key before starting the
following procedure.
Loosen the handle (A) and remove cover (B).
1.
Remove the 3 nuts (D);
2.
Remove the sharpener from the machine;
3.
Remove the pin (E) and the bolt (F);
4.
Remove the handle (G) and the guide (H);
5.
Remove the shaft with the sharpening stone
6.
(J) from the sharpener body (K);
Remove the 3 bolts (L);
7.
Install a new sharpening stone (P) on the
8.
sharpener.
Reassemble the sharpener in the machine
9.
following the reverse order of disassembly
described above.
a
lWays use the oRiginal
i
nadequate stone can bReak duRing shaRpening
and cause an accident With peRsonal injuRy and
. t
in the machine he use of
and safety glasses
.
above pRoceduRe
ATTENTION!
n
ogueiRa stones
ppe (
suitable gloves
)
is mandatoRy duRing the
Instructions Manual
D
B
A
G
E
K
J
.
6. Maintenance
F
H
L
P
73