Stoelting VB 35 Manual Del Usuario página 18

machine in order to be able to perform safety functions. Therefore, a safety component will be considered a device whose
failure to function compromises the safety of exposed persons.
(A, not visible in the photographs), designed to detect the magnet
!
Incorrect positioning of the magnet activates a machine
alarm, preventing it from starting. The magnet (B) must be
positioned with the arrows (1-2) VERTICAL.
Note:
If the cover is opened during an operating cycle (e.g.: to add ingredients), the cycle will be
"PAUSED", then will continue from where it left off only after the cover has been closed.
THE MAGNETIC SAFETY SENSOR IN THE COVER MUST NOT BE USED AS A MACHINE STOP
CONTROL.
THE MACHINE MUST ONLY BE STOPPED BY PRESSING THE RELATIVE "STOP" ICON, NOT BY
OPENING THE COVER (SEE SECTION 5.1"CONTROLS" IN THIS MANUAL).
The machine has an extraction door which allows the processing cylinder to be
sealed. Use the lever (A) to open the plate for extracting the processed foods.
DO NOT INSERT TOOLS (E.G.: TUBE BRUSH FOR CLEANING, ETC.) IN THE GRILLE OF THE
EXTRACTION DOOR WHEN THE MACHINE IS OPERATING.
TAMPERING WITH THE SAFETY DEVICE AND USE OF THE MACHINE IF IT IS DAMAGED OR
MALFUNCTIONING ARE STRICTLY PROHIBITED.
THE MANUFACTURER DECLINES ALL RESPONSIBILITY IN THE EVENT OF TAMPERING WITH
SAFETY DEVICES OR OPERATIONS CARRIED OUT IN A WAY THAT DOES NOT COINCIDE WITH
WHAT IS SPECIFIED IN THIS MANUAL, SINCE THEY MAY PUT THE HEALTH AND SAFETY OF
PERSONNEL AND/OR OBJECTS AT RISK.
TAMPERING WITH THE SAFETY DEVICE AND USE OF THE MACHINE IF IT IS DAMAGED OR
MALFUNCTIONING ARE STRICTLY PROHIBITED.
18
B
B
B
A
1
2