Stoelting VB 35 Manual Del Usuario página 50

DO NOT USE THE MACHINE IF ONE OR MORE SAFETY DEVICES MALFUNCTION OR ARE
DAMAGED!
Checking procedure:
Phase 1
With the machine empty remove the mixer from the cyl-
inder, close the cover and start the machine by pressing
and check that the motor-driven shaft starts up.
Phase 2
Open the cover. If the safety device is operating correctly,
the shaft will stop moving and the digital display will show
Phase 3
Close the cover again and press the MIX button (A) to
stop the motor-driven shaft. Open the cover again and
install the mixer in the cylinder, so that the machine is
ready for use.
50
A
A