Sanitization - Stoelting VB 35 Manual Del Usuario

•
- Position the extraction door chute (19) below the extraction
door (15) and secure it by tightening the clamp screws (30)
to the front panel.
TIGHTEN THE FIXING SCREWS, CHECKING THAT THERE IS NO PLAY IN THE CHUTE.
THE INCORRECT INSTALLATION OR CONTACT FAILURE OF THE MAGNET ON THE COVER
ACTIVATES A MACHINE ALARM, PREVENTING IT FROM STARTING.
•
- Fit the two slots in the basin support (20) over the clamp screws
(30) partly tightened on the front panel. When the basin support
(20) is in place, tighten the screws (30).
- Place the mat (21) on the basin support (20).

7.4 Sanitization

STEP 1
- Prepare a pail with a solution composed by room temperature water
- for models VB 35 use 3 gallons of water and 3/4 oz. of disinfecting
- for models VB 60 use 5 gallons of water and 1,1/4 oz. of disinfect-
- for models VB 80, VB 90 use 7 gallons of water and 1,3/4 oz. of
- for models VB 120 use 10 gallons of water and 2,1/2 oz. of disin-
- for models VB 160 use 11 gallons of water and 2,3/4 oz. of disin-
44
15
19a
30
30
20
30
20
19
30
21