Reasonably Foreseeable Improper Use - Stoelting VB 35 Manual Del Usuario

1.5.1 Reasonably foreseeable improper use

1. Do not insert in the cylinder a quantity of mix that is less than that recommended, as it could lead to ice forming on the
cylinder wall. That would make the machine noisy, cause wear and damage to the mixer scrapers. The suitable quan-
tity of product which can be processed is indicated in sec. 2.4 "Machine technical data" of this manual.
2. Do not insert in the cylinder a quantity of mix that is more than that recommended, as it could prevent correct mix
mixing, and the product can leak out of the cylinder. That would stress the mixer's motor-driven shaft. The suitable
quantity of product which can be processed is indicated in sec. 2.4 "Machine technical data" of this manual.
3. Do not press the extraction button when the mix or product in the cylinder is liquid, because the high rotating speed of
the mixer (counterclockwise) would make the product come out of the cylinder suddenly. (Consult section 5.1 "Con-
4. Do not press the extraction button at the end of the granita production cycle, because the high rotating speed of the
mixer (counterclockwise) would make the product come out of the cylinder suddenly. Press the MIX button (mixer
clockwise rotation) to make the granita come out of the machine cylinder correctly and safely. (Consult section 5.1
proximity to parts of the machine or materials at a very low temperature. Use suitable gloves that protect against low
This manual contains the information needed by authorised personnel to correctly use the machine.
A knowledge of and compliance with the general safety instructions and danger warnings contained in this manual are the
conditions for proceeding, in minimal risk conditions, with installation, putting into service, operating and maintenance of
the machine.
OPERATOR: a person trained for routine operation of the machine, that is to say, loading products to be processed, running
recipes, cleaning and routine maintenance.
QUALIFIED TECHNICIAN: a person whose training and professional education gives him a knowledge of machine service
conditions, and who is able to work on the machine and recognise and avoid any dangerous conditions.
Chapter 1
General Information
9