Reassembly - Stoelting VB 35 Manual Del Usuario

7.3 Reassembly

These operations must be carried out only with the socket's main breaker on "0".
ALWAYS WEAR NEW SUITABLE PROTECTIVE GLOVES.
STEP 1
•
on the mixer.
- Fit the mixer's lower scraper (13) in its seat.
•
- Fit the mixer (9) on the motor-driven shaft at the centre of the
cylinder.
To avoid vibrations and/or damaging parts, the
mixing impeller drive must be complete with its
bushing (C) before inserting it on the motor shaft
support.
- Slowly turn the mixer component drive so that the pin (21),
which is part of the shaft structure, engages in the slot (22)
made in the mixer component drive.
worn or swollen, substitute it. Tighten the mixer knob (8).
42
20 11
9
C
10
13
22
21
8