Installation Instructions; General Requirements - Stoelting VB 35 Manual Del Usuario

4 INSTALLATION INSTRUCTIONS

4.1 General requirements

INSTALLATION MUST ONLY BE PERFORMED BY QUALIFIED TECHNICAL PERSONNEL.
Once the package is near to the machine installation location,
cut the straps (A) and remove the cardboard (B) by pushing it
upwards.
Remove the documents and accessories located on the outside
of the machine.
Take care when removing the straps, as they may
accidentally hit the operator when cut.
frame to the base of the packaging.
(P) of the frame, using lifting equipment suitable for the weight
of the machine. During lifting pay special attention to the power
cable, taking care not to damage it.
DO NOT ATTEMPT TO LIFT
THE MACHINE BY HAND.
After positioning the machine in the selected area, put the side panels back on using the screws and dispose of the pack-
aging materials in accordance with the rules in force in the country where the machine will be used.
! Temperature: +2°C to +30°C (35.6°F to 86°F)
THE MACHINE MUST BE POSITIONED IN A LOCATION PROTECTED FROM RAIN AND SUN.
equipment and the refrigerating system.
OPERATING THE MACHINE IN AMBIENT CONDITIONS THAT DO NOT CONFORM TO THE INDI-
CATIONS IN THIS MANUAL WILL VOID THE GUARANTEE.
USE OF THE MACHINE IN POTENTIALLY EXPLOSIVE ATMOSPHERES IS STRICTLY PROHIBITED.
20
B
-
! Humidity: 10% - 95% (with no condensation)
C
A
D
P