Stoelting VB 35 Manual Del Usuario página 49

Replacing the mixer guide bushing
- Periodically check that the mixer guide bushing is intact and replace it if damaged or worn.
- Only use original spare parts.
Replace the bushing for the mixer component drive when there are signs of wear.
• Remove the bushing to be replaced (A) from the mixer com-
ponent drive (B).
• Insert the new bushing (C) into the mixer component drive (B).
TO AVOID VIBRATIONS AND/OR DAMAGING
PARTS, THE MIXER COMPONENT DRIVE
MUST BE COMPLETE WITH ITS BUSHING
BEFORE INSERTING IT ON THE MOTOR
SHAFT SUPPORT.
Chapter 8
Maintenance
A
B
C
C
S03
B
49