Picking Up Liquids; Technical Specifications - Nilfisk Multi 20 Manual Del Usuario

Warranty
Nilfi sk warranties apply for the duration specifi ed,
calculated from the time of handover of the product
to the customer. The warranty guarantees that the
product is free from defects.
Batteries, lamps and wearing parts are excluded
from the warranty.
In the event of defects arising during the duration
of the warranty and of which Nilfi sk is given notice,
Nilfi sk will, of their own choice, either repair the
defects, replace the unit or refund the purchase
price upon return of the unit. Excluded from this
warranty are defects, disorders and wearing effects
that can be attributed to wearing from normal use,
improper handling or faulty maintenance. Opening
the unit housing causes the warranty to become
void. Further claims may not be made on the basis
of the warranty. The statutory warranty rights of the
customer remain unaffected. Warranties can be
claimed upon presentation of the product and sales
receipt. Manufacturer warranty claims shall be made
to the manufacturer. Statutory warranty rights also
remain unaffected in this case.

Picking up liquids

Before liquids are picked up, always remove the
fi lter bag. Insert fi lter for wet operation. Check that
the fl oat works properly. If foam develops or liquid
emerges from the machine, stop work immediately
and empty the dirt tank.
Technical specifi cations
Model
Voltage (V)
P (W)
IEC
P (W)
max
Power socket
(W)
max
IP
Opriginal Instructions
Multi 20
CR T (CR / Inox)
INOX T VSC
(CR / INOX)
1150 (ZA 1200)
1400
NA EU, AU/NZ: 2000
GB: 1800
CH: 1100
Connecting electrical appliances
Use the socket on the vacuum cleaner for the pur-
pose defi ned in the operating instructions only. Be-
fore plugging an appliance into the appliance socket:
1. Switch off the vacuum cleaner.
2. Switch off the appliance to be connected. CAU-
TION! Follow the operating instructions and
safety instructions for appliances connected to
the power tool socket. Always unwind the cable
of the vacuum cleaner completely before use.
The power consumption of the connected appliance
must never exceed the value stated on the type
plate of the vacuum cleaner.
The operating voltage shown on the rating plate
must correspond to the voltage of the mains power
supply.
Parts identifi cation (ref. illu. 1&2, page 4)
A. On/off switch
B. Filter cleaning
C. Cable rewind*
D. Speed regulation*
E. Connection of powertool*
F. Connection of suction hose
G. Connection to blow function
H. Water drain*
I. Accessory storage
J. Hose and cable storage
K. Quick park
* Varies depending on model.
CR
INOX
220 - 240
NA
X4
Multi
Multi 30
T (CR / INOX)
T VSC
(CR / INOX)
1350
1800
EU, AU/NZ: 2000
GB: 1600
CH: 900
EN
DE
FR
ES
PT
IT
NL
SV
NO
DA
FI
EL
TR
CS
SL
HU
RO
EL
PL
SK
RU
ET
LT
LV
7