AL-KO Solo R13-72.5 HD Manual De Instrucciones página 49

Maintenance
Activity
Checking the brakes (test
braking on a straight path)
Checking the tyre pressure
Checking the state of tyres
Checking for loose parts
Checking the attachment
and sharpness of blades
Replacing blades
(2
Checking the drive belt
Replacing the drive belt
Checking the blade belt
Replacing the blade belt
Checking and adjusting the
parking brake
(2
Checking and adjusting the
drive
(2
Checking the engagement
and braking of blades
Checking of all fastenings
General lubrication
(3
Maintenance tasks on the
engine
(4
1) Contact your dealer at the first indication of operational malfunctions.
2) This procedure must be carried out by your dealer or by an authorised service workshop.
3) The general lubrication of all joint components should also be carried out before an extended period
of disuse for the ride-on mower.
4) The maintenance tasks on the engine are described in the engine manufacturer's instructions.
ADVICE
It may be necessary to shorten the maintenance intervals compared to those stated in the table
above in case of severe loading and at high temperatures.
Lubricating plan
To ensure that moving parts can move freely,
we recommend lubricating the following points at
least once a year.
Before
each use
X
X
X
X
(2
(2
(1 (2
(2
(1 (2
(2
After Every 25
each use operating
hours
X
X
X
X
X
X
X
X
Use a cloth to clean all points to be lubricated be-
fore greasing or spraying. In order to avoid corro-
sion, do not use water.
Every In the
100 ope- event of
rating malfunc-
hours tions
X
X
X
X
Each
time
before
putting
into
storage
X
X
49