Unpacking And Assembling The Ride-On Mower - AL-KO Solo R13-72.5 HD Manual De Instrucciones

Safety instructions
Repairs on the machine must be carried out
by the manufacturer or by one of its customer
service centres.
Wear ear defenders.
The ride-on mower does not have approval
for road use, and is not allowed to be driven
on public roads.
Do not mow during thunderstorms. No pro-
tection against lightning strikes.
Do not carry any passengers on the machine
Do not mow on slopes with more than 10°
(17%) gradient
Do not work with the ride-on mower after you
have consumed alcohol, medicines which im-
pair reactions, or drugs.
Operate the ride-on mower with particular
care on slopes, and always work uphill or
downhill, never across the slope.
Comply with the permitted operating times in
your vicinity.
The ride-on mower can cause serious inju-
ries due to its inherent weight. Take particu-
lar care when loading and unloading the ride-
on mower before/after transport on a vehicle
or trailer.
This ride-on mower may not be towed. Use a
suitable vehicle for transport on public roads.
Do not operate the ride-on mower in working
areas with poor ventilation (e.g. garage).
The exhaust gases contain poisonous carbon
monoxide as well as other harmful substan-
ces.
UNPACKING AND ASSEMBLING THE
RIDE-ON MOWER
Delivered condition
The ride-on mower is supplied packed on a woo-
den pallet. The steering wheel and the seat are
located separately in the packaging. The indivi-
dual parts of the grass sack are also delivered
in the packaging. For transport reasons, the ma-
chine is delivered without being filled with engine
oil or fuel. Before the engine is started, oil and fuel
must therefore be filled as per the requirements of
the engine operating instructions.
Scope of delivery
The standard packaging includes:
Ride-on mower excluding attachments
Steering wheel
Seat
Components of the grass sack
Mulch kit
Wallet containing:
Instructions for use
Further documents
Screwed parts
2 ignition keys
Locking pin for steering wheel
Unpacking and assembly (1, 2)
ADVICE
For unpacking and assembly, select a le-
vel, firm surface with sufficient space for
handling the ride-on mower, individual
parts, and packaging. For all tasks, use
the correct tool.
CAUTION!
Danger of personal injuries and da-
mage to the mower mechanism!
If the ride-on mower is unloaded incor-
rectly from the wooden pallet, people
may be injured, and the ride-on mower's
mower mechanism may be damaged.
The ride-on mower must therefore be
unloaded as described in the following
steps.
1. Use a sharp knife to cut the packing tapes.
2. Lift the upper packaging away from the woo-
den pallet.
3. Open the packaging with care, so as not to
damage the ride-on mower and the individual
parts.
4. Remove the loose parts and confirm the com-
pleteness of the delivery; see section "Scope
of delivery".
5. Unload the ride-on mower from the wooden
pallet using e.g. a secured unloading ramp of
suitable width, with a non-slip surface and suf-
ficient strength:
37