Steering Wheel Panel; Function Buttons - Kärcher MC 130 Classic Manual Del Usuario

Steering wheel panel

Steering wheel
1
Travel direction lever
2
Display with function buttons
3
Multi-function switch
4
Function buttons/setting buttons
The following indicators are shown on the display after switching
on the ignition.

Function buttons

1
Display indicator in start/transport mode
2
Setting buttons
3
The display changes when the corresponding function button is
pressed. Pressing again or pressing the "Home" button returns
you to the previous display.
The settings button is used for changing the settings.
Function buttons
F1 Information such as the vehicle operating instructions can
be stored here
In working mode: Switch in the high-pressure cleaner (Op-
tion)
F2 Display date and time
F3 Settings
F4 Bridging the seat contact switch, see chapter Operation
with a bridged seat contact switch
F5 Reversing warning buzzer on/off
F6 Reversing camera on/off
F7 Suction mouth camera on/off
F8 Set Tempomat
F9 Resume Tempomat
F10 Service menu
70
Display
Setting buttons
+ button
- button
"Home" button
Esc button
"Return" button Completes a setting procedure
Display indicators in start/transport mode
The following indicators are shown on the display in start/trans-
port mode.
Engine speed
1
Travel speed
2
Hare symbol (Fast mode indicator)
3
Tortoise symbol (Slow mode indicator)
4
Engine operating hours symbol
5
Operating hours counter
6
Working hours symbol (no function)
7
Working hours meter
8
Mileage
9
Date and time
10
Travel direction backwards
11
Forwards direction of travel
12
Preheating coil symbol
13
Engine coolant temperature
14
Battery charging monitor warning light
15
Engine oil pressure warning light
16
Parking brake warning light actuated
17
Fuel level indicator
18
English
Jumps one field up when making
settings
Jumps one field down when making
settings
Navigates to the "Home" screen for
the respective operating mode
(Transport / Work)
Jumps one step back when making
settings