Descargar Imprimir esta página

View Of The Device For A 2-Brush Sweeping System - Kärcher MC 130 Classic Manual Del Usuario

Ocultar thumbs Ver también para MC 130 Classic:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 225

View of the device for a 2-brush sweeping system

2-brush sweeping system
1
Locking lever
2
Device detection plug
3
Hydraulic connection and water connection
4
Side brushes
5
1. Operation of the 2-brush sweeper system is described in a lat-
er chapter.
Connecting the high-pressure hoses and water hoses
Brush PTO
1
Pivot suction mouth/sweeping brush
2
Raise/lower sweeping brush
3
Brush PTO
4
Right-hand water connection
5
Left-hand water connection
6
1. Plug in the hydraulic hoses according to the colour coding.
2. Plug in the water hoses at the left and right sides.
Control assignments for a vacuum sweeper with a 2-brush
Note
The indicators in the switches light when the switches are
switched on.
Left joystick
1
– Joystick forwards: Lower the brush arms simultaneously
and switch on the side brushes
– Joystick backwards: Raise the brush arms simultaneously
and switch off the side brushes
– Joystick to the left/right: Pivot the brush arms simultaneous-
ly
Right joystick
2
Button is not used
Raise/lower suction mouth
3
Hydraulic system on/off
4
Button is not used
5
Button is not used
6
Water circulation function on/off (recycling water)
7
Suction fan on/off
8
ECO function
9
Switches the complete work program on.
PTO (side brushes, suction fan), fresh water, water circulation
(recycling water)
Water pump on/off
10
(A) Sweeping brush speed selection, common for the left-hand
and right-hand sides
(B) Button is not used
(C) Engine speed
Press to adjust the values
Note
The suction power depends on the set engine speed.
● 1600 rpm light waste
● 2200 rpm normal soiling
● 2500 rpm strong, heavy soiling
(D) Not used
(E) Left-hand and right-hand side brush contact pressure button
(F) Save button
Press to save adjusted values or programs
(G) Rotary knob
Press to change the adjusted values
Switching over to the 2-brush sweeping system (pulled):
1 Switch on the ignition.
2 Press F10 on the vehicle display.
3 Use F5 to select a pulled sweeper system.
English
Operation
sweeper system (pulled)
91

Publicidad

loading

Este manual también es adecuado para:

Mc 130Mc 130 plus