Bosch rexroth 3 842 998 350 Manual De Instrucciones página 117

Perform initialization (RESET):
1. Check all plug connections for correct seating.
NOTICE
Asynchrony of the lifting module movements
The lifting modules could be damaged.
Do not restrict the lifting modules by mechanical connection in the asynchronous
„
lifting movement.
2. Press buttons (B) and (C) on the hand switch simultaneously for 10 seconds, see
Fig. 21.
The lifting modules move asynchronously to the lower end position up to the
mechanical stop and switch off.
3. Release the buttons.
The RESET is confirmed by a triple acoustic signal.
The "Initialize (RESET)" procedure is completed.
3 842 555 612/2019-01, MPS: HEAP, Bosch Rexroth AG
Assembly 39/78