Wiring The Control Components - Bosch rexroth 3 842 998 350 Manual De Instrucciones

8.5.6

Wiring the control components

Electrical current!
Risk of serious injury or death from electric shock.
„ Do not bend, pull or mechanically load the connecting cable.
Avoid crushing and shearing points.
„
Provide for length compensation when dimensioning the mains connection.
„
„ Insert all plug connections correctly.
Fig. 31: Control components wiring (1)
The lifting module wiring of the material buffer (accessory upright) is carried out as
shown in Fig. 31.
WARNING
3 842 555 612/2019-01, MPS: HEAP, Bosch Rexroth AG
Assembly 49/78
T1A < 755 mm
T3 < 625 mm
555 612 -29