Storing And Moving To Table Heights (Memory); Anti-Torsion Element; Changeover Cm/Inch - Bosch rexroth 3 842 998 350 Manual De Instrucciones

Save setting (memory)
Calling up a saved setting

10.2 Storing and moving to table heights (memory)

Fig. 48: Memory
1. Manually adjust the table height.
2. Press the "M" button three times to enter memory mode.
3. Press one of the buttons 1, 2 or 3 within 5 seconds to save the set position.
The control confirms the storage by an acoustic signal.
Press 1, 2 or 3 until the corresponding position is reached.
„

10.3 Anti-torsion element

Fig. 49: Anti-torsion element
If the anti-torsion element is activated, the table cannot be moved, which can
prevent uncontrolled movement of the table.
Press the "M" button for 10 seconds to activate or deactivate the anti-torsion
„
element.

10.4 Changeover cm/inch

Fig. 50: Changeover cm/inch
Pressing the "M" and "UP" buttons simultaneously switches the display between
„
cm and inch.
Operation
3 842 555 612/2019-01, MPS: HEAP, Bosch Rexroth AG
65/78
555 612 -44
555 612 -45
555 612 -46