4.9.4 TEMP Setup (Optional)
Screen Description:
²
TEMP ALM: temperature alarm switch. This item set ON, and the user cannot adjust it.
"Hi/Lo": high and low alarm limit setting for temperature.
²
"Unit": set the temperature unit, "℃"and "℉" can be optional.
²
"Sensor": temperature sensor type, "KRK" and "YSI" can be selected. Please set the sensor type according to the
sensor in use, or the temperature measurement will fail or be inaccurate.
4.9.5 Hemostat Setup (Optional)
Figure 4.15 NIBP setup screen
Figure 4.16 TEMP setup screen
Figure 4.17 Hemostat setup screen
34