GASPARDO VITIGREEN Empleo Y Mantenimiento página 23

1.6 HANDLING
If the machine is handled, it must be lifted by hooking (Fig. 2) onto
the appropriate holes with a suitable winch or crane of suffi cient
capacity. Because of the danger involved, this operation should
be carried out by trained and responsible personnel.
cod. 19502450
USE AND MAINTENANCE
The mass of the machine is on the identifi cation Plate (8 Fig. 3).
Stretch the rope to keep the machine level. Adjust the length of
the ropes to balance the load. The hook points can be detected
by fi nding the «Hook» symbol (7 Fig. 4).

ENGLISH
fi g. 2
23