SURE petcare SureFeed Microchip Pet Feeder Connect Manual Del Usuario página 12

Cleaning & maintenance
It is important to keep your Microchip Pet Feeder Connect clean to
ensure it functions reliably. Do NOT submerge the whole unit into
water or place it under a running tap! Water can cause damage
to the feeder and its electronics.
Ensure the four black dots on the hoop are kept clean at all times.
The mat can be wiped clean using a damp cloth. Do not put items
in the dishwasher. Hand-wash only.
The Microchip Pet Feeder Connect includes a cleaning access cover
on its base to make it easier to remove crumbs or debris.
How to remove the lid for cleaning
6
Move the lid lock slider
to the unlocked position.
Now flip the top half of the
lid back over so it is resting
on the lid guides.
5
Move the lid lock slider back
to the locked position.
After cleaning, replace the lid keeping both
halves vertical. Make sure it is securely fitted.
21
1
2
Press the ( ) button.
Once the lid is open,
pull it upwards.
3
4
Hand-wash only.
Do not put it in a dishwasher.
How to ensure your feeder is kept clean
1
7
Press the open/close
button ( ).
Reattach all of the parts, making sure to
attach the cleaning access cover first.
6
Use a damp cloth to ensure that
all the surfaces of the Feeder are
clean. Do not use any abrasive
cleaning products.
5
Hand-wash all the removable parts.
Do not put them in a dishwasher.
EN
2
Remove the bowls, bowl supports
and the lid - see previous page.
3
Debris stuck around the weighing arms
can affect the performance of the Feeder,
so it is very important to keep it clean.
Do not use any abrasive sponges as
they can damage the Feeder and cause
it not to work properly.
4
Hold the Feeder above the bin,
remove the cleaning access cover
and let the debris fall out.
22